This power unit options a permanent magnet motor by using a electrical power up gravity down circuit. Activate the begin solenoid to start the motor to lift the machine. The lowing motion is activated from the solenoid valve with all the decreasing velocity managed from the stress compensated movement control valve. Goods of this series could be extensively utilized in the marketplace of logistic units such as fork lift, mini lift table, and so on.
one. This energy unit is of S3 duty cycle, i.e.,non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean each of the hydraulic elements concerned in advance of installation of the energy unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst, which ought to also be clean and absolutely free of impurities. N46 hydraulic oil is suggested.
4. This electrical power unit is made to be mounted vertically.
five. Check the oil level while in the tank after the initial star with the energy unit.
six. Oil transforming is required immediately after the preliminary 100 operation hours,afterwards as soon as each and every 3000 hrs.
7. More pump sizes and tank sizes are avaiable upon request.