Why Coupling Grease?
Adequate lubrication is crucial for satisfactory gear coupling operation. Gear Coupling Grease is exclusively designed for gear coupling applications to boost coupling lifestyle whilst dramatically cutting down maintenance time. Its substantial viscosity base oil and tackifier combine to maintain the grease in spot and protect against separation and it really is in comprehensive compliance with NSI/AGMA 9001-B97 lubrication suggestions.
Coupling Grease is dark brown in shade and produced with a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to substantial centrifugal forces typically located in couplings. Bearing or basic purpose greases usually separate and reduce effectiveness because of substantial centrifugal forces over the numerous components at substantial rotational speeds. These high centrifugal forces encountered in couplings separate the base oil through the thickeners. Hefty thickeners, which have no lubrication qualities, accumulate while in the gear tooth mesh location resulting in premature coupling failure. Gear Coupling Grease is made to really resistant to centrifugal separation with the oil and thickener, which lets the lubricant to become applied for a rather lengthy period of time.
One of several secrets for the achievement of Gear Coupling Grease will be the variable consistency through the entire doing work cycle of the application. The consistency of our gear coupling grease adjustments using the operating disorders. Doing work in the lubricant below actual services problems triggers the grease to turn into semi-fluid, functionally solash lubricating the wear surfaces from the coupling. As the grease cools, it returns towards the authentic consistency, therefore avoiding leakage.
Gear Coupling Grease is available from stock in 14 oz. cartridges, one lb. and five lb. cans.
Minimizing of coupling wear
Resistance to water washing
Corrosion and rust protection
Higher load carrying capabilities
Extended relubrication frequency
Use at temperatures as much as 325° F
Staying in area underneath large speeds
Resistance to centrifugal separation
Reduction in down time & maintenance cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated by using a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.