ep

June 4, 2020

Our regular 700 Series – the heart of Ever-Power swiftness reducer products – has been serving industry reliably for over 10 years. Its proven modular design has set the sector standard for functionality and is the most imitated product in the current worm gear speed reducer marketplace. But why accept a knock-off when you’re able to have the initial – from Ever-Power.
Specifications
11 basic one reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting flexibility permits installation in virtually any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, and also greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal existence.
Both 2D and 3D CAD drawings can be found in our eCatalog.
Ever-Power worm gearboxes possess earned a reputation to be an industry benchmark worldwide. Our success came from our relentless drive for quality with state-of-the-artwork technology, all and will be offering worm gearboxes are inexpensive prices. High flexibility accorded through a wide choice of mounting options, shaft configurations and engine interfaces, makes the Ever-Power worm gearbox the default choice for the industry. The helical-worm and the double-worm version, with or without the torque limiter, add up to the advantage, creating an extremely versatile drive system.
Ever-Power Worm gearboxes provide high torque with low speed gear ratio. Being simple and compact in design, these gears can perform higher gear ratio than the helical gears. These worm decrease gears having screw type characteristics are similar to helical gears, but its helix position is typically comparatively larger) and its body is normally quite lengthy in the axial direction. The gears in these gearboxes can be right or left-handed dependant on the purpose.
Mounting option include universal housing, aspect flanges, foot (horizontal and vertical), shaft mounted with torque arm. Available in Solid shafts (one or dual), with torque arm or torque limiter.
Worm reduction gears features
Principles
A worm gear is a kind of interlocking gear made up of a worm shaft and worm wheel. The worm is shaped just like a screw and the worm wheel is certainly a kind of gear machined to get a tooth profile with the same configuration.
The operation of a worm gear is similar with that of a bolt and nut. The principle is equivalent to a nut that is fixed so that it cannot rotate and for that reason progresses in the axial path when the bolt is turned.
The look of a worm gear is thought of through the relationship between your rack and spur gear on the center plane of the worm wheel.
Features
High reduction ratio One rotation of the worm rotates the worm wheel simply by one tooth. For this reason, in a 1 speed reduction gears, the wheel can be manufactured so that it’ll be rotated 1/60 (1/120 in special applications).
Orthogonal shaft The shafts are aligned orthogonally because of the structure. This feature can help you layout the turning tranny direction at a right angle.
The arbitrariness of the rotation direction The screw direction of the worm could be clockwise or counterclockwise (generally clockwise). It is possible to change the rotation direction of the worm wheel by changing the screw path.
A wide variety of shaft layouts The wide selection of shaft layouts is among the features of interlocking gears.For example, right shaft output, still left shaft output, dual shaft input and dual shaft output, etc., combine for a complete of 14 types (Physique 2) and, if attachment orientations are included, you’ll be able to select from over 40 layouts.
Low noise, low vibration The interlocking of the worm and worm wheel is characteristic since the contact is certainly linear and the relative slide is great. In comparison to rolling power transmission, noise and vibration are really low. For this reason, this technology is utilized to drive medical apparatus, elevators and escalators, etc.
The primary specifications of worm reduction gears
MA Series(Small)
Center distance(mm) 32,40
Reduction ratio 10,20,30,40,50,60
Input capacity(kW) 0.1~1(at an input of 1800 rpm)
Output torque(N・m) 20~66
Input speed(rpm) 0~1800
MA Series(Medium)
Center distance(mm) 50,63,80,100,125,140,160
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.4~30(at an input of 1800 rpm)
Output torque(N・m) 900~3570
Input speed(rpm) 0~1800
S Series
Center distance(mm) 50,60,70,80,100,120,135,155,175,200,225,250,300,350,400,450,500
Reduction ratio 10,15,20,25,30,40,50,60
Input capacity(kW) 0.3~255(at an input of 1800 rpm)
Output torque(N・m) 50~56600
Input speed(rpm) 0~1800
Key points when choosing a worm reduction gears
Selection
When choosing a worm reduction gears, the procedures for selecting the right gear are described in the maker catalogs and the series and models ought to be selected according to those procedures. Particular care ought to be taken in essential areas such as for example selecting the strain index, calculating the overhang load and examining the heat rated capacity from the manufacturer.
Cautions during use
When utilizing a worm decrease gears, heat produced during the initial period of make use of is high and running-in operation at 1/4, 1/2 and 3/4 of rated torque for eight hour periods is key to sufficiently achieving the performance of the worm decrease gears.
Maintenance and inspection
After completing running-in procedure (approximately 50 hours), it is necessary to change the lubricating oil and to change the lubricating oil from then on about 1 time each year according to the procedure manual offered by the manufacturer.
Product Description
The Worm Decrease Gear Box is provided by our company is of high-quality. Our products are created by using premium quality materials and enhance technology at our vendors end. They are widely used in a variety of sectors. Our items are often available at a very low market prices.
Motor Mount Frame Options
TEC Motors, worm decrease gearbox.
Option A-160 B5 Frame, Flange Mount.
Option B-132 B14 Frame, Face Mount.
Option C-100/112 B5 Frame, Flange Install.
High efficiency and secure operation. High load capability and overload functions. Result Torque = (Power (kW) x 9550 (Constant))/ Gearbox result speed (rpm).
Higher ratios on request dependent on service factor (40:1, 50:1, 60:1, 80:1, 100:1)
DESCRIPTION
Wormgears of the VF series are milestones for the sector worldwide. They succeeded in merging uncompromising quality with stateoftheart technology amd renown price effectiveness.Absolute flexibility is distributed by the wide choice of several mounting options, shaft configurations and electric motor interface, all offered as standard. The helicalworm and the doubleworm edition, with or without the torque limiter, also add up, creating an extremely versatile drive system.
ADDITIONAL INFORMATION
AMP
0.42 A
EFFICIENCY
84%
HP
0.12
KW
0.09
RATIO
7
RPM
200
TEMPERATURE RATING
20 level C TO 80 level C
TORQUE
4 Nm
HSN
8483.40.00
WARRANTY PERIOD
12 Months
The worm reduction gears can be found in two series: X and H.
The series X, having a worm and worm wheel set, comes in versions XA with shaft and XF-XC with mounting provisions for motor.
Version XF (bell casing + coupling) offers great versatility to match a broad range of applications and provides higher efficiency than the compact collection XC, where in fact the emphasis is on space performance.
Series H offers the same features as series X with an added plus: a spur equipment pre-stage at the insight end provides higher performance and a broader range of ratios than the X series.
Frame sizes 110 and 90 feature a cast-iron casing cast enbloc, whereas smaller sizes use die-cast aluminium housings. The worm shaft is manufactured from casehardened and hardened alloy metal and ground-finished.
The worm wheel includes a cast iron hub with cast bronze insert. Hollow result shaft is supplied as standard.
Broad range of possibilities:
second input, result flange, single or dual extension output shaft, torque limiter with through cable, torque arm.