Outfitted with the zero leak bidirectional checking sole-noid valves, this power unit is developed for your operation of two independent circuits. Which are respectively for that key and subordinate platforms in the double scissors lift. Two cut-off valves are employed for lowering the machine manually in case of energy reduction. If a lot more independent circuits are required to your application please get hold of us for availability.
Remark: one. Please consult our income engineer for that different pump displacement, motor energy or tank capability.
two. CSA or UL certified motors can be found upon request.
1. The AC motor is of S3 duty cycle, which could only perform intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean all the hydraulic parts concerned prior to installation of the electrical power unit.
3. Viscosity in the oil shoud be 15~46 cst,and the oil should be clean and absolutely free of impurities,N46 hydraulic oil is encouraged.
4. The energy unit really should be mounted vertically.
5. Check the oil degree within the tank immediately after the initial running of the power unit.
six. Oil altering is required soon after the preliminary one hundred operation hrs,afterwards when every single 3000 hours.