Material Handling Energy UNIT 1
Standard Description
This electrical power unit is built for that fork lift industry, consisting of very effective gear pump, DC motor, guide raise and reduced valve, tank, ect. The up and down motion are managed through the lever of the guide release valve, that is outfitted with an electric switch to activate the motor. The lowing speed is managed through the pressure compensated movement management valve.
Special Notes
1. The duty of this electrical power unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean each of the hydraulic components concerned prior to installation of the electrical power unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst, which must also be clean and absolutely free of impurities, N46 hydraulic oil is suggested .
four. Oil transforming is needed following the original one hundred operation hours, afterwards as soon as each 3000 hours.
five. The electrical power unit shown is made to be mounted horizontally.

Material Dealing with Energy UNIT 2
General Description
This energy unit characteristics electrical power up gravity down circuit. Activate the commence solenoid to start out the motor to lift the machine. The lowing motion is activated through the solenoid valve with the lowering pace managed through the pressure compensated flow control valve. Merchandise of this series can be extensively utilized in the business of logistic devices which include fork lift, mini lift table, and so on.
Specific Notes
one. The duty of this energy unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean all of the hydraulic components concerned before mounting the power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst,which need to also be clean and absolutely free of impurities, N46 hydraulic oil is advisable .
4. Oil altering is required just after the first one hundred operation hrs,afterwards when each and every 3000 hrs.
5. The energy unit really should be mounted horizontally.