DC MOTOR PUMP GROUP one
Basic Description
Consisting of the heavy duty DC motor and also the CB1S gear pump, this pump motor group is definitely an excellent hydraulic electrical power unit for mobile hydraulic equipments, such as motor vehicle carriers, mobile aerial lifts, and backup methods.
DC MOTOR PUMP GROUP two
Common Description
This motor pump includes four.5″ DC motor, a CBSR gear pump with built-in relief valve and check valve.
DC MOTOR PUMP GROUP three
Common Description
This motor pump consists of a 4.5″ DC motor as well as a CBSR gear pump that has a typical power up/gravity down circuit with a relief valve, a check out valve along with a solenoid release valve.
Distinctive Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean every one of the hydraulic parts concerned in advance of mounting the energy unit.
3. Viscosity from the hydraulic oil shoud be 15~68 cst, which really should also be clean and free of charge of impurities. N46 hydraulic oil is suggested.
four. The electrical power unit needs to be mounted horizontally.
5. The relief valve pressure is preset about 25% increased than the working pressure.
6. Flow control valve for lowing pace adjustment is available unpon request.